/****PIC單片機通過SPI串口可以讀取TC77傳感器的溫度數值****/

/****通過串口與上位機連接在串口調試工具中可顯示溫度的數字值**/

/*****************主程序************************/

#include "p18f4620.h"

#define TC77_CS LATAbits.LATA2 //片選信號，低電平有效

//初始化

void initial()
{
INTCON = 0x00;
ADCON1 = 0x07;
PIE1 = 0;
PIE2 = 0;
}

//串口初始化

void EUSART_Init()
{
TXSTA = 0xA4;
RCSTA = 0x90;
BAUDCON =0x00;
TRISC = TRISC|0x80;
TRISC = TRISC&0xBF;
SPBRG = 25;
}

//發送數據到串口

void send_ch(int d)
{
PIR1bits.TXIF = 0;
TXREG = d;
while(TXSTAbits.TRMT == 0);
}

//SPI配置TC77

void TC77_init(void)
{
TRISCbits.TRISC3 = 0;
TRISCbits.TRISC4 = 1;
TRISAbits.TRISA2 = 0;
SSPSTAT = 0xC0;
SSPCON1 = 0x20;
PIR1bits.SSPIF = 0;
}

//讀TC77溫度傳感器

unsigned int Read_TC77(void)
{
unsigned char temh,teml;
unsigned int temp;
TC77_CS = 0; //片選TC77
PIR1bits.SSPIF = 0;
SSPBUF = 0; // 讀高8位
while(!PIR1bits.SSPIF);
if(SSPSTATbits.BF)
temh=SSPBUF;
PIR1bits.SSPIF = 0;
SSPBUF = 0;//讀低八位
while(!PIR1bits.SSPIF);
if(SSPSTATbits.BF)
teml=SSPBUF;
TC77_CS = 1;
temp = temh;
temp = (temp << 6)+(teml >> 2); //換算為十六位數據
return temp;
}

//延時函數

void wait(unsigned char t)
{
unsigned char i;
unsigned int j;
for(i=0;ifor(j=0;j<10000;j++);
}

//主函數

void main()
{
unsigned int T;
initial();
EUSART_Init();
TC77_init();
while(1)
{
T = Read_TC77();
send_ch(0xFF);
send_ch(T);
send_ch(T >> 8);
Nop();
Nop();
wait(10);
}
}