$NOMOD51
;------------------------------------------------------------------------------
; This file is part of the C51 Compiler package
; Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
;------------------------------------------------------------------------------
; STARTUP.A51: This code is executed after processor reset.
;
; To translate this file use A51 with the following invocation:
;
; A51 STARTUP.A51
;
; To link the modified STARTUP.OBJ file to your application use the following
; BL51 invocation:
;
; BL51, STARTUP.OBJ
;
;------------------------------------------------------------------------------
;
; User-defined Power-On Initialization of Memory. 用戶定義需上電初始化的內存空間
;
; With the following EQU statements the initialization of memory
; at processor reset can be defined: . 在CPU復位時，使用以下EQU命令可定義初始化的內存空間
;
; ; the absolute start-address of IDATA memory is always 0. IDATA 存儲器的空間的絕對起始地址總是0
IDATALEN EQU 80H ; the length of IDATA memory in bytes. IDATA存儲器空間初始化大小--80個bytes
;
XDATASTART EQU 0H ; the absolute start-address of XDATA memory. XDATA存儲器空間的絕對起始地址0x00
XDATALEN EQU 0H ; the length of XDATA memory in bytes.XDATA存儲器空間初始化大小--0個bytes
;
PDATASTART EQU 0H ; the absolute start-address of PDATA memory. PDATA存儲器空間的絕對起始地址0x00

PDATALEN EQU 0H ; the length of PDATA memory in bytes. PDATA存儲器空間初始化大小--0個bytes
;
; Notes: The IDATA space overlaps physically the DATA and BIT areas of the
; 8051 CPU. At minimum the memory space occupied from the C51
; run-time routines must be set to zero.
;------------------------------------------------------------------------------
;
; Reentrant Stack Initilization. 再入堆棧初始化
;
; The following EQU statements define the stack pointer for reentrant
; functions and initialized it: . 以下用EQU指令定義了堆棧再入函數和初始化
;
; Stack Space for reentrant functions in the SMALL model.使用SMALL存儲器模式時再入函數的堆棧
IBPSTACK EQU 0 ; set to 1 if small reentrant is used. 使用SMALL存儲器模式再入函數時將其設置成1
IBPSTACKTOP EQU 0FFH+1 ; set top of stack to highest location+1. 將堆棧頂設置為最高地址+1
;
; Stack Space for reentrant functions in the LARGE model.使用LARGE存儲器模式時再入函數的堆棧空間
XBPSTACK EQU 0 ; set to 1 if large reentrant is used. 使用LARGE存儲器模式再入函數時將其設置成1
XBPSTACKTOP EQU 0FFFFH+1; set top of stack to highest location+1. 將堆棧頂設置為最高地址+1
;
; Stack Space for reentrant functions in the COMPACT model.使用COMPACT存儲器模式時再入函數的堆?？臻g
PBPSTACK EQU 0 ; set to 1 if compact reentrant is used. 使用COMPACT存儲器模式再入函數時將其設置成1
PBPSTACKTOP EQU 0FFFFH+1; set top of stack to highest location+1. 將堆棧頂設置為最高地址+1
;
;------------------------------------------------------------------------------
;
; Page Definition for Using the Compact Model with 64 KByte xdata RAM. 使用COMPACT存儲器模式時64K字節XDATA存儲器空間的分頁定義
;
; The following EQU statements define the xdata page used for pdata. 以下用EQU指令定義PDATA類型變量在XDATA存儲器空間的頁地址
; variables. The EQU PPAGE must conform with the PPAGE control used
; in the linker invocation.
;
PPAGEENABLE EQU 0 ; set to 1 if pdata object are used. 使用PDATA類型變量時將其設置成1
;
PPAGE EQU 0 ; define PPAGE number. 定義頁
;
PPAGE_SFR DATA 0A0H ; SFR that supplies uppermost address byte
; (most 8051 variants use P2 as uppermost address byte)
;
;------------------------------------------------------------------------------

; Standard SFR Symbols
ACC DATA 0E0H
B DATA 0F0H
SP DATA 81H
DPL DATA 82H
DPH DATA 83H

NAME ?C_STARTUP ;模塊名為 ?C_STAUTUP

?C_C51STARTUP SEGMENT CODE ;代碼
?STACK SEGMENT IDATA ;堆棧

RSEG ?STACK
DS 1

EXTRN CODE (?C_START);程序開始地址
PUBLIC ?C_STARTUP

CSEG AT 0 ;用戶程序開始地址
?C_STARTUP: LJMP STARTUP1

RSEG ?C_C51STARTUP

STARTUP1: ;單片機上電IDATA內存清零 如果不需要上電清零IDATA 可以注銷IF到IFEDN之間的話句或者修改IDTALEN的長度 為了具有掉電保護功能

IF IDATALEN <> 0
MOV R0,#IDATALEN - 1
CLR A
IDATALOOP: MOV @R0,A
DJNZ R0,IDATALOOP
ENDIF

;單片機上電XDATA內存清零 如果不需要上電清零XDATA 可以注銷IF到IFEDN之間的話句或者修改IDTALEN的長度 為了具有掉電保護功能

IF XDATALEN <> 0
MOV DPTR,#XDATASTART
MOV R7,#LOW (XDATALEN)
IF (LOW (XDATALEN)) <> 0
MOV R6,#(HIGH (XDATALEN)) +1
ELSE
MOV R6,#HIGH (XDATALEN)
ENDIF
CLR A
XDATALOOP: MOVX @DPTR,A
INC DPTR
DJNZ R7,XDATALOOP
DJNZ R6,XDATALOOP
ENDIF

;送PDATA存儲器頁面高位地址

IF PPAGEENABLE <> 0
MOV PPAGE_SFR,#PPAGE
ENDIF

;單片機上電PDATA內存清零 如果不需要上電清零PDATA 可以注銷IF到IFEDN之間的話句或者修改PDATALEN的長度

IF PDATALEN <> 0
MOV R0,#LOW (PDATASTART)
MOV R7,#LOW (PDATALEN)
CLR A
PDATALOOP: MOVX @R0,A
INC R0
DJNZ R7,PDATALOOP
ENDIF