SPI串行接口AD轉換器TLC2543的驅動程序

//-----------------------函數聲明，變量定義--------------------------------------------------------
#include
#include
//--------------------------------------------------------------------------------------------------

//2543控制引腳宏定義
//--------------------------------------------------------------------------------------------------
sbitSS1=P1^0;//將p1.0口模擬片選
sbitSCK=P1^1;//將p1.1口模擬時鐘輸出
sbitMOSI=P1^2;//將p1.2口模擬主機輸出
sbitMISO=P1^3;//將p1.3口模擬主機輸入
//-----------------------預定義控制字--------------------------------------------------------
#defineCONTROL_WORD0x00//選擇通道0，輸出數據長度12bit，MSB，單極性二進制數
//--------------------------------------------------------------------------------------------------
//函數名稱：delay
//入口參數：N
//函數功能：延時子程序，實現(16*N+24)us的延時
//系統采用11.0592MHz的時鐘時,延時滿足要求,其它情況需要改動
//--------------------------------------------------------------------------------------------------
voiddelay(unsignedintN)
{
inti;
for(i=0;i}
//--------------------------------------------------------------------------------------------------
//名稱：read2543
//功能：TLC2543驅動模塊
//輸入?yún)?shù)：CON_WORD控制字
//輸出參數：ad轉換值
//--------------------------------------------------------------------------------------------------
unsignedintread2543(unsignedcharCON_WORD)
{
unsignedintad=0,i;
SCK=0;
SS1=0;
for(i=0;i<12;i++)
{
if(MISO)ad|=0x01;
MOSI=(bit)(CON_WORD&0x80);
SCK=1;
delay(3);
SCK=0;
delay(3);
CON_WORD<<=1;
ad<<=1;
}
SS1=1;
ad>>=1;
return(ad);
}

//--------------------------------------------------------------------------------------------------
//名稱：main
//功能：主函數
//輸入?yún)?shù)：無
//輸出參數：無
//--------------------------------------------------------------------------------------------------
voidmain()
{unsignedintad;
while(1)
{
ad=read2543(CONTROL_WORD);
}
}